Aerial Lift Platform Liners - Bucket Liners


CPI's liners meets or exceed all OSHA and ANSI standards. Our liners are made with high quality linear low density polyethylene in rotational molding equipment manufactured for CPI. Each liner is tested at 50 or 70 KVAC prior to shipment. Testing is certified by date and serial number.

Current Production

Part# Compatible Equipment Height Top Bottom
L2439 Aerial-Lift, Altec, Holan, Skyworker Telect and Versalift equipment 39" 24"x24" 22"x22"
L2442 Altec, Dur-A-Lift, Holan, Lift-All Teco, Telect and Versalift equipment 42" 24"x24" 22"x22"
L2422A Altec, ETI, and UTEM equipment 42" 24"x24" 20.5"x20.5"
L3039 Altec and Asplundh 39" 24"x30" 21"x27"
L2941 Altec 41" 23"x29" 21"x27"
L3042 Altec, Dur-A-Lift, Holan, Lift-All Telect and Versalift equipment 42" 24"x30" 21"x27"
L4242 Versalift equipment 42" 24"x42" 22"x40"
L4842 Altec, Hi-Ranger, Lift-All and Versalift equipment 42" 24"x48" 21"x45"
L642 Altec, Pitman and RO equipment 42" 24.5"x24" 21"x21"
Note: All liners may be ordered 50Kv or 70Kv. Unless specified the liner will be 50Kv.
Note: All liners may be ordered with an inside step for easier access.
Note: All measurement shown in the chart above refer to OUTSIDE dimensions of the liner.

Altec is a trademark of Altec Industries Inc., Duralift is a trademark of Durnell Engineering, Inc., ETI is a trademark of Engineering Technology, Inc., Hi-Ranger is a trademark of Terex Corporation, Versalift is a trademark of Time Manufacturing Company.


We are always interested in adding to our inventory of available liners. If the equipment you need is not listed above, please contact us to see if your needs can be met.

Contemporary Products of Texas, Inc. 4100 FM 1105 Walburg, TX 78673
512.868.0346 | 512.868.0351 (fax)
.
Warranty